3D printing can be used to make injection molds of unimaginable complexity but which kind of 3D printing process is suitable when?
Suppose that a part is to be made using injection molding in large quantity for an extended period of time, what Additive Manufacturing (AM) process will be the best, such that the mold does not give way too soon?
Also, suppose that the part to be made is custom and only has to be made in small quantities - that is to say that the injection mold will be used limited number of items and then thrown away - which is the best AM technique then? Best in the sense of economic feasibility, lower cost, lower capital investment etc.?
Yes, this is very broad. That said...
For high detail you want SLA. i.e. jewelry. If you just want a prototype of a mold, you can do a standard FDM style printer (95% of printers are FDM, and that number is a guess)
Really, you should be asking what material you need for your mold, but you can open a second question for that.
Do more research on injection molding. There is a great deal of information on how molds are made, i.e. How It's Made Plastic injection molds.
You will see there is a vast difference between a plastic, or silicon, mold and an injection molding machine. You are thinking that injection molding as a single mold, when it is really it is a system composing of several pieces of heavy duty machinery that can pump out hundreds of items a day automatically. However, it usually starts at 20k USD for the tooling for injection molding. Your costs could be a fraction of that or could be several times that. This is just a generality. So, if you are making 100 units you won't want to go down that route. For 10,000 units, on the other hand, it would be acceptable.
Stratasys offers a 3D printing system specifically for producing injection molds. They claim their Polyjet/Digital ABS line of printers can produce prototype injection molds good for 10-100 shots of the same mold and that the material can be used with regular injection molding machines.
Of course, the molds still wear out quickly and are only suitable for prototyping and/or extremely small production runs.
Injection molds generally require tooling and are not usually cast from 3D prints. Depending on the size of your part - costs can easily skyrocket to over $60,000. The price per part is sometimes lower than other methods. Other possible methods (depending on the part) are Thermo-Forming, Vacu-Forming, and different Casting methods - sandcasting (investment casting), flexible casting (rubber, urethane, and alginate), and hard casting (printing mold negative). Some have immediate use of 3D Printed parts...others have work flows in place to convert your files for use. You can print a mold negative, prep it, use mold release, and cast shapes from that mold... certainly the casting material would be flexible or the mold would need the proper relief- But it is certainly possible.
theoretical assumptions. I just discovered 3D printing and I am in the planning phase of building my first 3D printer, so I am a total n00b in this. Please correct any assumptions I got wrong. ... voxels to create the appearance of a color, just like monitors display colors. As far as I know only HP Jet Fusion 3D printer uses this process, but it uses a process vastly different from normal diy 3D...There is this great hotend called a diamond hotend, which can be used to print in 3 colors and mix them into hundreds? of colors. This can for example be used with Red, Green and Blue filament to mix
Assuming I've extracted 3D models from a game which I legally bought (such as StarCraft). I am allowed to 3D print them for personal use or give it to close friends? Is there any general rule, or this suppose to be specified in the license? If so, which section/clause potentially can prevent me from doing that? Or I need to contact the company who owns the game to obtain the permission?
One of the local libraries has a new small Makerbot 3D printer. I have been submitting Sketchup files converted to STL files for printing. The tech guy who runs the printer for patrons is having... to taking suggestions. He wants to get the printer running smoothly for patrons. I submitted a file with my own base with supports made in Sketchup. But, the tech guy said he needs to set the printer to create it's own base and supports. Additional info: When I printed it by letting Makerbot create the base and supports, it came out to be 1 3/4" as shown here: https://flic.kr/p/EashnD Printer
A fellow maker has tried printing a 3D model in clear PLA (<5% infill, 1 or 2 perimeters), burying it most of the way into casting sand, and then pouring molten aluminum. This melts and burns the PLA, and the aluminum takes the space that the printed model used to take. There's plenty of room for improvement in his process, but I'm asking about what he can do in terms of the 3D printing process to make his prints more casting-friendly. What print settings are (generally) best for use in this sort of casting? What materials, if any, would work better than unpigmented PLA? (Must
I use a Micro3D printer, running on OctoPi (yay!) (although this question should be relevant to any 3D printer that offers these features) and have options for raft and wave bonding. Are there best case scenarios for when it is appropriate to use (or NOT use) either? Can/should they ever both be used at the same time?
, which is not, as far as I can tell, a temperature that the heatbed reaches, so, in theory, cork should be safe to use as an insulator. In fact temperatures of around 300C are used...A comment to my question How much insulation do I really need? has made me paranoid about using cork as a heatbed insulator: Why worry -- other than the fact that it's flammable. All... material. That is to say, yes it burns but very slowly and it doesn't produce flame so it doesn't spread. Also, when burning, the smoke that it releases is not toxic. However, I am not sure if all
I've made a few 3D prints at school on what I assume are very low-end 3D printers, but they seem cheap, flimsy, and pretty ugly. How much better quality can I expect from professional-level 3D printers (those commonly used by online printing services)?
I am planning on building a large enclosed (Cartesian XY-Head) 3d printer. I want to keep the inital build time minimal and it is very likely I would need to build the ~50x50cm heatbed from scratch, because it doesn't exist in ebay. The enclosure itself is not separately heated, but depends on waste heat from the printing process. The enclosure will eventually be vented outdoors with a 12V CPU vent via ducting (air flow unknown). Do I even need a heated print bed, when I am planning to only print PLA?
volume with powder. The support material that other printing technologies require is part of the powder based printing anyway. It would be possible to pack the build volume with many prints and print them...With fdm printers, the 3D object that should be printed can be positioned anywhere in the build volume. But it's only practical to place it on the bottom, because otherwise support material would... until a few print queued up that fit together in the build volume and only then start the process. Do people do this?