Searching for User:Tormod Haugene

635 Results for User:Tormod Haugene in 0 ms
  • I'm looking at getting this printer, the da Vinci 1.0w 3D Printer, very soon as my first printer. Since this is an enclosed printer, from what I can tell from the pictures, and given that it is a PLA ...

  • I'm running an OctoPi Raspberry Pi installation of OctoPrint, and the webcam images are too bright. I found some documentation on changing the exposure of mjpg-streamer, see github:foosel/OctoPrint/...

  • Mesh/Geometry quality Mariusz KubiƄski

    tried searching but couldn't find anything. I do not have a 3d printer so can't really experiment on my own, which means that when I am going to order a 3d print I want to get it as good as possible. ...

  • I'm trying to design a camera handle, which will be around 8" long and will have a brass camera thread insert in the end, where the camera will be mounted. (That way, I don't have to screw the camera...

  • I've captured a stationary spinning object in a computer game. It's semi translucent and there are stationary objects behind it. As I expected it did not convert using Autodesk's remake. It gives no ...

  • I have just got a Monoprice Maker Select 3d printer (which is really just a Wanhao Duplicator i3). I want to print a model that came on the included SD card (1.gcode) with ABS filament. I first pres...

  • This is my problem: I'm assembling a 3D printer with the RAMPS 1.4 board and Arduino Mega. I have assembled the structure and the electronics (set drivers, placed the jumpers, connected stepper motor...

  • How can this be done given that the object to be printed is the same size as itself? In the CubePro printers that I have used before, the object to be printed is inside some kind of glass panel. Only ...

  • I have never much cared about self intersecting meshes when slicing with Cura. Geometry like the one below are often practical. I for instance add lots of rivets that self intersect with the base geom...

  • I'm having an issue with my new Prusa i3. (This one: https://www.amazon.co.uk/gp/product/B01DLIRDFW/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1) For some reason the Y and Z axis are swapped when ...

  • I just got a Hictop Prusa i3 printer and I have it fully assembled. When I tested out the motors to check them the Z-axis motors were not moving and it was making a grinding sound. I have lifted the s...

  • Im new with my 3D printer, I just print two different pawn pieces from thingverse. I just used cura to convert the files to be readable for the printer. Is my problem with the pieces has to do with th...

  • Hello is there a way to prevent bend on print with M3D printer?

  • I recently had a problem with the z-axis of my printer. To resolve the issue with the Z axis not moving I remove the left polished rod. Am I able to use the printer with just one smooth rod?

  • I've tried using a throat with a PTFE tube, but encountered the problem described in this question. It seems only a small amount of excess pressure in the extruder is enough to force out the inner tub...